Table of Contents
Advertisement
5-1 AC Current Adaptor
Safety Information
Read First: Safety Information
To ensure safe operation and service of the current clamp, follow these
instructions:
• Read the operating instructions before use and follow all safety instructions.
• Use the Current Clamp only as specified in the operating instructions,
otherwise the clamp's safety features may not protect you.
• Adhere to local and national safety codes. Individual protective equipment
must be used to prevent shock and arc blast injury where hazardous live
conductors are exposed.
• Do not hold the Current Clamp anywhere beyond the tactile barrier, see Figure 1.
• Before each use, inspect the Current Clamp. Look for cracks or missing
portions of the clamp housing or output cable insulation. Also look for loose
or weakened components. Pay particular attention to the insulation
surrounding the jaws.
• Never use the clamp on a circuit with voltages higher than 600V CAT III.
• Use extreme caution when working around bare conductor or bus bars.
Contact with the conductor could result in electric shock.
• Use caution when working with voltages above 60V or 30V ac. Such
voltages pose a shock hazard.
Warning
To avoid possible electric shock or personal injury:
• Before each use, inspect the Current Clamp. Look for cracks or missing
portions of the clamp housing and output cable insulating cover and for loose
or weakened components. Pay particular attention to the insulation
surrounding the clamp jaws.
• Do not use a damaged Current Clamp. If a clamp is damaged, tape it shut to
prevent unintended operation
User Manual
.
29
Advertisement
Table of Contents
