Table of Contents
Advertisement
HOLD : Display hold mode.
4.4
REC MAX : Maximum recorded reading.
REC MIN : Minimum recorded reading.
4.5
REC : Recording mode indication and current reading.
KW: Active Power Unit: or KWh, MWh, active energy unit.
4.6
Kvar: Reactive Power Unit or Kvarh, Mvarh reactive energy unit.
4.7
4.8
Display of reactive Power.
Q : Harmonic reactive power measured display indicator.
4.9
Q1: Phase 1 reactive power measured display indicator.
Q2: Phase 2 reactive power measured display indicator.
Q3: Phase 3 reactive power measured display indicator.
Qt: Total reactive power measured display indicator and total reactive
energy measured display indicator.
4.10 DATA No.: Last manual datalogged memory address number
M : Manual datalogged indication, M displays one time store one sets
data into the memory.
R No.: Recall manual datalogged address number indication, the
DATA M : Auto datalogging indication, M disappears one time store
4.11
1P2W: Measure single-phase two-wire power line indicator.
User Manual
indication (01~50).
memory data displayed for read.
one sets data into the memory .
01 ~ 99: Maximum 99 memory blocks can be use.
FULL: Memory full indication, if exceed 99 memory
blocks or micro SD CARD is full used.
Advertisement
Table of Contents
