Table of Contents
Advertisement
To avoid electrical shock and / or meter damage, use caution when
connecting test leads to live components. The jaws of alligator clips can
create a short circuit between closely spaced live parts. Avoid making
connections to feeder conductors or bus bars at elevated potentials.
Whenever, please make connections to the output side of a circuit breaker
as possible as you can, which can provide better short circuit protection.
• Follow all legal requirements.
• Follow all instructions in the manuals.
• Obey posted instructions.
• Never assume that a circuit is de-energized, check it first.
• Always set up the measurement first, then connect the test leads to the
circuit.
• Remove all test leads that are not in use.
• Make connections to the meter first, before connecting leads to a live
circuit.
• Connect the ground lead first, then the voltage leads and the current probe,
Disconnect in reverse order.
• Route test leads carefully.
2. INTRODUCTION FEATURE
User Manual
WARNING
7
Advertisement
Table of Contents
