PCE Instruments PCE-360-ICA Instruction Manual page 35

9. Energy measurement:
 Press "ENERGY" key, the "Pt", "Qt", "St" and "PFt" or "ψt" annunciator
and energy integrate start time are displayed. The energy integrate
value and the current time will be continuous accumulate.
a). KW displays KWh
b). KVAR displays KVARh
c). KVA displays KVAh
 Press "STOP" key to stop energy accumulated and the "HOLD"
annunciator is displayed.
 Press  key to exit the energy measurement
※ U1 must be connected to voltage source during the measurement of U2, U3, I1, I2
and I3, because U1 is the main signal source of the whole meter measuring system.
Otherwise you could not have any measurement from U2, U3, I1, I2 and I3
User Manual
P
Q
U1
.
S
.