PCE Instruments PCE-360-ICA Instruction Manual page 33

A: Line, N: Neutral, G: Ground, ➔ Face the arrow toward the load.
1. Press key to turn on the meter.
2. Press "WIRING" key to select the 1P2W electrical system under test, the
"1P2W" annunciator will be displayed.
3. Connect the voltage test leads and current probe to the meter.
 Connect the black voltage test lead to the "N" terminal.
 Connect the red voltage test lead to the "U1" terminal.
 Connect the I1 current probe output plug to the "I1" jack.
 If you want to measure ground leakage current, connect the I4 current
probe output plug to the "I4" jack.
4. Connect the voltage test leads and current probe to the electrical
equipment to be tested.
User Manual
I1 I2
I3 I4
1P2W Wiring Connection Diagram
U1 U2 U3
Ⅲ
?
N