Table of Contents
Advertisement
Auto datalogging function is active.
PC linked.
6. MAINTENANCE
6-1 General Maintenance
1. Repairs or services that are not covered in this manual should only be
performed by qualified personnel.
2. Clean the meter and accessories with a damp cloth and a mild soap. Do
not use abrasives, solvent, or alcohol. These may damage the text.
3. Additional to this it is recommended to open the jaws of the Current Clamp
and to wipe the magnetic pole pieces with a lightly oiled cloth. This in
order to avoid rust or corrosion to form on the magnetic poles.
6-2 Battery Replacement
•
To AVOID electrical shock, remove the test leads and current probe
before replacing the batteries.
1. As battery power is not sufficient, LCD will display
replace new battery is required.
2. Disconnect all test leads and current probe from any power electrical
source, press
the jacks.
3. The battery cover is secured to the bottom case by two screws. Using a
screw driver to remove the two screws from the bottom case.
User Manual
key to turn off the meter, and remove the test leads from
WARNING
55
BT
annunciator,
Advertisement
Table of Contents
