PCE Instruments PCE-360-ICA Instruction Manual page 22

13. Hz I4 key: Display measured frequency or I4 current probe value control
key, the "Hz" or "I4" annunciator is displayed.
14. SET key: Setting current date and time function key, press "SET" key to
enter current time setting mode and interval time setting mode
for auto datalogging use.
15 TIME key: Display current date and time control key, press and hold down
16.    keys:
 In the harmonic measurement mode, press  key to select voltage or
current harmonic source. Press  or  key to select which source to
be displayed. Press  or  key to select harmonic order.
 Setting current date and time, or recall manual data memory to read
memory data in cycles control keys.
17. START key: Start auto datalogging function.
18. STOP key: Stop auto datalogging function. Press "START" key to
resume recording in current data sets.
19. MEMORY key: Manual data memory control key. Press "MEMORY" key
User Manual
"TIME" key display current data and time.
Press and hold down "TIME" key then press
meter, the "
function.
each time to store one set current display reading into the
memory, the "M" annunciator and the memory address
number is displayed, total memory size is 50 sets.
" mark appear, enter into auto power off
21
key turn on the