PCE Instruments PCE-360-ICA Instruction Manual page 41

A, B, C: Line, ➔ Face the arrow toward the load.
1. Press key to turn on the meter.
2. Press "WIRING" key to select the 3P3W2M electrical system under test,
the "3P3W2M" annunciator will be displayed.
3. Connect the voltage test leads and current probe to the meter.
 Connect the black voltage test lead to the "N" terminal.
 Connect the red voltage test lead to the "U1" terminal.
 Connect the yellow voltage test lead to the "U2" terminal.
 Connect the I1 current probe output plug to the "I1" jack.
 Connect the I2 current probe output plug to the "I2" jack.
4. Connect the voltage test leads and current probe to the electrical
User Manual
I1 I2
I3 I4
3P3W2M Wiring Connection Diagram
U1 U2 U3
Ⅲ
N