Materials required for mounting and wiring
Materials
Four screw clamps
Wires and connectors
Cable ties
2.3
Mounting
The controller is designed for mounting in the front panel.
Panel cutout:
• Length: 118.0 mm
• Height: 93.0 mm
• Tolerance: ± 0.3 mm
1. Insert the controller in the panel.
2. Insert the screw clamps:
3.b.1
3. Tighten the screw clamps to 0.19 Nm. Do not tighten the clamps to more than 0.19 Nm.
2.4
Terminals
User manual 4189341354A EN
3.b.2
3.b.3
*Click*
Used for
Mounting the controller in the front panel
Wiring third party equipment to the controller terminals
Securing wiring
3.b.4
Page 8 of 72