Deif SGC 121 User Manual page 51

No. Alarms
17 Emergency Stop
18 Charge Fail
19 Battery Over Voltage
20 Battery Under Voltage
21 Over Current
22 Maintenance Due
23 Over Load
Auxiliary input/User
24
defined name
25 Fail To Stop
26 Fuel Theft
27 Unbalanced Load
28 No Speed Signal
29 Fail To Start
Engine Temp/ Ckt Open
30
(terminal 24)
31 Fuel Level Ckt Open
User manual 4189341354A EN
Causes/Indication
Emergency stop is activated.
Or
The emergency stop is configured as a digital input,
and the input has triggered for longer than the
configured time.
The charge alternator voltage is less than the
configured value.
The battery voltage is more than the configured value.
The battery voltage is less than the preset threshold.
Genset current is more than the preset threshold.
The timer for engine running hours has expired. An
alarm occurs when the running hours or days expires.
The measured kW load rating is more than the
configured value.
The auxiliary input has triggered for longer than the
configured time.
The genset is operating after the controller has sent a
stop command.
The fuel consumption is more than the configured limit. Warning
The load on a phase is more than or less than other
phases by a configured value.
There is no signal from the engine speed.
The genset has not started after the configured
number of start attempts.
The temperature sensor on terminal 24 is not detected
(circuit open).
The fuel level sensor is not detected (circuit open).
Actions
Shutdown
Shutdown
Warning
Electrical Trip
Notification
Shutdown
Warning
Electrical Trip
Notification
Shutdown
Warning
Electrical Trip
Notification
Shutdown
Warning
Electrical Trip
Notification
Notification
Warning
Shutdown
Warning
Electrical Trip
Notification
Shutdown
Warning
Electrical Trip
Notification
Shutdown
Shutdown
Warning
Electrical Trip
Notification
Shutdown
Shutdown
Shutdown
Warning
Electrical Trip
Notification
Shutdown
Warning
Electrical Trip
Notification
Page 51 of 72