2. Installation
2.1
Dimensions
Controller
Panel cut-out
2.2
Tools and materials
Tools required for mounting
Tool
Safety equipment
Screwdriver, PH2 or 5 mm flat
Wire stripper, pliers and cutters
Too much torque damages the screw clamps and/or controller housing
Do not use power tools during the installation.
User manual 4189341354A EN
Length
139.0 mm (5.47 in)
118.0 mm (4.65 in)
Height
114.0 mm (4.49 in)
93.0 mm (3.66 in)
Used for
Personal protection, according to local standards and
requirements
Tighten the fixing screw clamps, torque 0.15 N·m (1.3 lb-in)
Prepare wiring and trim cable ties
NOTICE
Depth
38.3 mm (1.51 in)
Tolerance: ± 0.3 mm (0.01
in)
Page 7 of 72