Nameplate Of The Prosonic Flow W Sensors; Nameplate Of The Prosonic Flow U Sensors - Endress+Hauser PROline prosonic flow 90 Operating Instructions Manual

2 Identification
10
2.1.2

Nameplate of the Prosonic Flow W sensors

Order Code:
1
Ser.No.:
2
Type:
3
DN100 - DN4000
4
-20°C (-4°F) ... +80°C (+175°F)
5
8
EEx nL IIC/IIB T6-T1
7
Tamb/Tumg:-20°C..+60°C
Fig. 2: Nameplate specifications for the "Prosonic Flow W" sensors (example)
1 Ordering code / serial number: See the specifications on the order confirmation for the meanings of the
individual letters and digits.
2 Sensor type
3 Range of nominal diameters: DN 100...4000
4 Max. fluid temperature range:
5 Reserved for information on special products
6 Degree of protection
7 Ambient temperature range
8 Data on explosion protection
Refer to the specific additional Ex documentation for detailed information. Please do not hesitate to con-
tact your E+H sales office if you have any questions.
2.1.3

Nameplate of the Prosonic Flow U sensors

ENDRESS+HAUSER
PROSONIC FLOW U
U-CL-2F-L-A
2
Type:
TM: -20°C (-4°F) ... +80°C (+175°F)
4
-20°C (-4°F) ... +60°C (+140°F)
T amb.:
6
FM
7
APPROVED
Fig. 3: Nameplate specifications for the "Prosonic Flow U" sensors (example)
1 Ordering code / serial number: See the specifications on the order confirmation for the meanings of the
individual letters and digits.
2 Sensor type
3 Range of nominal diameters: DN 15...100
4 Max. fluid temperature range:
5 Degree of protection
6 Ambient temperature range:
7 Data on explosion protection
Refer to the specific additional Ex documentation for detailed information. Please do not hesitate to con-
tact your E+H sales office if you have any questions.
ENDRESS+HAUSER
PROSONIC FLOW W
XXXXX-XXXXXXXXXXXX
12345678901 RY
W-CL-1F-L-B
OPEN
6
IP67
FM
APPROVED
II3G
CL.I, Div.2, GP. ABCD
Dust-Ignitionproof for
CL.II, Div.1, GP. EFG, CL.III
For Installation refer to
control dwg. of transmitter
– –
20 °C ( 4 °F) ... +80 °C (+175 °F)
1
93UA1-XXXXXXXXXXXX
Order Code:
12345678901
Ser.No.:
3
DN15 - DN100
CL.I, Div.2, GP. ABCD
CL.I, Zone 2 IIC T6-T1
For Installation refer to control dwg. of transmitter
– –
20 °C ( 4 °F) ... +80 °C (+175 °F)
– –
20 °C ( 4 °F) ... +60 °C (+140 °F)
PROline Prosonic Flow 90
XA0..D/
i
2001
06/a3/....
CLOSE
NEMA
TYPE 4X
i
CH 1
IP52
5
Endress+Hauser