Installation; Incoming Acceptance, Transport And Storage; Incoming Acceptance; Transport - Endress+Hauser PROline prosonic flow 90 Operating Instructions Manual

PROline Prosonic Flow 90
Endress+Hauser
3

Installation

3.1

Incoming acceptance, transport and storage

3.1.1

Incoming acceptance

x Check the packaging and the contents for damage.
x Check the shipment, make sure nothing is missing and that the scope of supply
matches your order.
3.1.2

Transport

The devices must be transported in the container supplied when transporting them to
the measuring point.
3.1.3

Storage

Note the following points:
x Pack the measuring device in such a way as to protect it reliably against impact for
storage (and transportation). The original packaging provides optimum protection.
x The storage temperature corresponds to the ambient temperature range (Page 93) of
the transmitter, the measuring sensors and the corresponding sensor cables.
x The measuring device must be protected against direct sunlight during storage in
order to avoid unacceptably high surface temperatures.
3 Installation
13