Pentax EPK-i7010 Instructions For Use Manual page 81

3
Press the [] key.
• The [Patient data edit No.*] screen for a new patient or the selected
patient appears.
• Follow the procedure below to enter or change data in the [Patient
data edit No.*] screen. Be sure to enter a name in the [Name] field.
1 Press the [] or [] key to select an item.
2 Press the alphanumeric keys to enter or change data.
Press the [Backspace] key in the [Patient data edit No.*] screen
to delete one character on the left of the cursor. Press the
[Delete] key to delete one character on the right of the cursor.
3 Press the [Enter] or [Esc] key to return to the [Patient list preset]
screen.
Pressing the [Enter] key reflects any data entered and changes
made and pressing the [Esc] key discards any data entered and changes made.
Pressing the [Esc] key after changing data displays the change cancellation confirmation message. Select [Yes] to
return to the [Patient list preset] screen. Select [No] to return to the [Patient data edit No.*] screen.
4
To enter or change data for another patient, press the [] or [] key to select a patient and repeat
Step 3.
5
Press the [Enter] or [Esc] key.
• Press the [Enter] key to return to the normal screen where the information of the patient selected in the [Patient list
preset] screen is displayed.
• Press the [Esc] key to return to the normal screen displayed prior to the [Patient list preset] screen.
 If the capture function is enabled, do not use any special symbols such as the ones below.
Examples of symbols not to use: / . * ? " < > : \ |
 Deleting Patient Data
Press the [Backspace] or [Delete] key while the [Patient list preset] is displayed to delete the data for that patient.
1
Press the [Backspace] or [Delete] key.
• A confirmation message for deleting the data appears.
• Select [Yes] to delete the displayed patient data. Select [No] to keep
the registered data.
2
Press the [] or [] key to select [Yes] or [No] and
press the [Enter] key.
• The [Patient list preset] screen reappears.
• Press the [Esc] key to return to the [Patient list preset] screen
without deleting patient data.
[Patient data edit No.*] Screen
[Patient list preset] Screen
Operating Procedure
5
76