Pentax EPK-i7010 Instructions For Use Manual page 60

 P-in-P Main/Side change
Switch between the endoscopic image and external input video screens in P-in-P mode.
[Main] The images input from an external device are displayed on the main screen of the monitor. The endoscopic images
from the endoscope are displayed in the sub screen.
[Side] The endoscopic images from the endoscope are displayed on the main screen of the monitor. The images input from
an external device are displayed in the sub screen.
1
Press [Main] or [Side].
Confirm that the message "Main:External video" is displayed on the monitor while [Side] is selected.
NOTE
During the twin mode, the setting for [P-in-P Main/Side change] is fixed to [Main].
 Enhancement setting
Specify the edge enhancement/structure enhancement display levels that can be switched using a customize button on the
touch panel, endoscope button, foot switch, or keyboard.
1
Press [>].
• The [Enhancement setting] screen appears.
• The level that is currently specified is indicated by green
characters at the top of the screen.
2
Press the buttons of the levels you want to use.
5
• The selected level buttons illuminate blue.
• Pressing a button again cancels the selection.
3
Press [OK].
• If you switch to another screen without pressing the [OK] button,
the settings will not be applied.
 SE setting
Specify the SE display levels that can be switched using a customize button on the touch panel, endoscope button, foot switch,
or keyboard.
1
Press [>].
• The [SE setting] screen appears.
• The level that is currently specified is indicated by green
characters at the top of the screen.
2
Press the buttons of the levels you want to use.
• The selected level buttons illuminate blue.
• Pressing a button again cancels the selection.
3
Press [OK].
• If you switch to another screen without pressing the [OK] button,
the settings will not be applied.
55
Operating Procedure
The level that is currently specified is
indicated by green characters.
Select the levels you want to use.
Confirm the selection.
The level that is currently specified is
indicated by green characters.
Select the levels you want to use.
Confirm the selection.