Pentax EPK-i7010 Instructions For Use Manual page 56

 Assign foot switch
Set the functions for the foot switches.
1
Press [>].
• The [Assign foot switch] screen appears.
2
Select the foot switch for which you want to set a
function from [L] and [R].
• The selected foot switch button illuminates blue.
3
Press the button of the function you wish to
configure.
• You can press W X to display additional functions.
• The name of the assigned function is displayed below the foot
switch.
• The functions that can be assigned are the same as "Assign
scope buttons" (P.48).
5
 Scope enhancement
Set whether or not to enable enhancement processing in the endoscope.
[Enable] Enable endoscope enhancement processing in the endoscope. Enhancement processing in the processor is
disabled.
[Disable] Disable endoscope enhancement processing in the endoscope. Enhancement processing in the processor is
enabled.
1
Press [Enable] or [Disable].
When a 90i/i10/90K/K10/J10 series endoscope is connected, only enhancement processing in the processor is used,
regardless of the setting of [Scope enhancement].
NOTE
For use in combination with a different model color video processor, we recommend setting [Enable]. When an
endoscope that was used with this set to [Disable] is connected to a different model color video processor, the
[Enhancement] setting will be set to [Off].
51
Operating Procedure
The function assigned to each
foot switch is displayed.
Assignable Functions
Display additional functions.