Pentax EPK-i7010 Instructions For Use Manual page 51

Function Name
USB capture*
USB printer*
Video Rec/Stop*
Enhancement*
Noise reduction
Contrast
Twin mode*
Twin mode display
Digital zoom*
Image rotate
ND mode*
Film counter reset
Optical zoom speed
P-in-P display
External video input
P-in-P Main/Side change
Scope eject*
Image size
Function Description
Save a still image to Image Recording Media in accordance with the
setting of [File storage setting (Still image)].
Send a still image to the connected USB printer.
Start and stop recording video. The video files are saved to Image
Recording Media in accordance with the setting of [File storage setting
(Video image)].
Switch the edge enhancement/structure enhancement level available in
[Enhancement setting].
Switch the level for noise reduction between [Off], [Low], [Medium], and
[High].
Switch the mode for contrast processing between [Normal], [Mode1], and
[Mode2].
Set or cancel twin mode.
Switch the size of the images on the left and right sides of the screen in
twin mode between [1:1], [3:2], and [2:3].
Switch the magnification ratio for the endoscopic image in accordance
with the setting of [Digital zoom setting].
Switch the display orientation for the endoscopic image between
[Normal] and [Rotate].
Switch the level for ND mode between [Off], [Low], [Medium], and [High].
Reset the film counter to 1.
Switch the zoom speed for an optical zoom endoscope between [Low],
[Medium], and [High].
Switch P-in-P mode display between [Off] and [On].
Display images input from an external device on the touch panel.
Switch between the endoscopic image and external input video screens
in P-in-P mode.
Press and hold the button to remove the endoscope while the processor
is on.
Switch the display size of the endoscopic image between [Full] and
[Medium].
Reference
Page
P.60
P.71
P.62
P.39
P.40
P.40
P.41
P.41
P.54
P.41
P.43
P.68
P.54
P.54
P.54
P.55
P.66
P.66
Operating Procedure
5
46