Pentax EPK-i7010 Instructions For Use Manual page 65

Time zone No.[32] (GMT +11:00)
Time zone No.[33] (GMT +12:00)
Time zone No.[34] (GMT +13:00)
3
Press [OK].
• If you switch to another screen without pressing the [OK] button, the settings will not be applied.
• Make sure to set the date correctly.
 File storage settings (Still image)
Set the method to save still images.
1
Press [>].
• The [File storage settings (Still image)] screen appears.
2
Configure the settings of [Select drive], [Folder and
file name], [Disk space warning], and [Option].
 Select drive (Still image)
Set the "Image Recording Media" (P.91) as the destination for saving still images.
1
Press [>] of [Select drive] in the [File storage settings
(Still image)] screen.
• The [Select drive (Still image)] screen appears. The Image
Recording Media currently connected and the total size and free
space of each Image Recording Media is indicated on the
screen.
• If you connect Image Recording Media after displaying the
[Select drive (Still image)] screen, press [Refresh] to perform
recognition of the Image Recording Media.
2
Press the button of the Image Recording Media to
use as the save destination.
• The selected Image Recording Media button illuminates blue.
NOTE
 Only one Image Recording Media can be set to save images at one time.
 Up to three Image Recording Media can be connected at one time. However, do not connect Image Recording Media
via a USB hub.
 After replacing Image Recording Media, make sure you recheck that the [Select drive] setting is configured properly.
 High capacity Image Recording Media tends to take longer to be recognized by the system. Wait till the system
recognizes the external module before start operating.
Vladivostok, Solomon Islands, New Caledonia
Auckland, Wellington, Fiji, UTC+12
Samoa, Nuku'alofa
Display the advanced settings screen.
Icon indicating that the Image Recording
Media is selected as the save destination
for video images.
Indicates the Image Recording Media
currently connected and the total size
and free space of each Image
Recording Media.
Perform Image Recording
Media recognition again.
Operating Procedure
5
60