Pentax EPK-i7010 Instructions For Use Manual page 68

 Select drive (Video image)
Set the "Image Recording Media" (P.91) as the destination to save video images.
1
Press [>] of [Select drive] in the [File storage settings
(Video image)] screen.
• The [Select drive (Video image)] screen appears. The Image
Recording Media currently connected and the total size and free
space of each Image Recording Media is indicated on the
screen.
• If you connect Image Recording Media after displaying the
[Select drive (Video image)] screen, press [Refresh] to perform
recognition of the Image Recording Media.
2
Press the button of the Image Recording Media to
use as the save destination.
• The selected Image Recording Media button illuminates blue.
NOTE
 Only one Image Recording Media can be set to save images at one time.
 Up to three Image Recording Media can be connected at one time. However, do not connect Image Recording Media
via a USB hub.
5
 After replacing Image Recording Media, make sure you recheck that the [Select drive] setting is configured properly.
 High capacity Image Recording Media tends to take longer to be recognized by the system. Wait till the system
recognizes the external module before start operating.
 Folder and file name (Video image)
Set the names of the folders and files generated in the PENTAX folder of the "Image Recording Media" (P.91) when video
images are saved.
1
Press [>] of [Folder and file name] in the [File storage
settings (Video image)] screen.
• The [Folder and file name (Video image)] screen appears.
2
Select [Name], [ID], or [Date] of [Current folder] to set
the name.
3
Press [Name] or [ID] of [File name] to switch it on or
off.
• Each press of a button switches the name on or off.
• In addition to [Name] or [ID], a consecutive number is
automatically added to a file name. A four-digit number is added
when either [Name] or [ID] is on, and an eight-digit number when
both of them are off.
63
Operating Procedure
Icon indicating that the Image Recording
Media is selected as the save destination
for still images.
Indicates the Image Recording
Media currently connected and the
total size and free space of each
Image Recording Media.
Perform Image Recording
Media recognition again.
The current folder and file name settings
are displayed in a folder tree.
Set the folder and file names.