Pentax EPK-i7010 Instructions For Use Manual page 59

 Digital zoom setting
Configure the zoom settings for when [Digital zoom] is assigned to a customize button on the touch panel, endoscope button,
or foot switch, and when zoom operations are performed with the keyboard.
1
Press [>].
• The [Digital zoom setting] screen appears.
2
Select [Off - x1.2], [Off - x1.5], [Off - x2.0], [Off - x1.2 -
x1.5], [Off - x1.5 - x2.0], [Off - x1.2 - x2.0], or [Off - x1.2
- x1.5 - x2.0] to set the zoom ratio.
3
Select [N] or [O] to set the up/down order of
the zoom.
[N] When the zoom ratio has reached the maximum,
pressing the customize button will return the zoom
ratio to actual size.
[O] When the zoom ratio has reached the maximum,
pressing the customize button will incrementally
reduce the zoom ratio until it returns to the actual size.
 Optical zoom speed
You can adjust the zoom speed of an optical zoom endoscope.
1
Select [Low], [Medium], or [High].
NOTE
As the optical or electronic expanded observation display has a narrow view, please secure a view enough when
performing an operation.
 Film counter type
Set the display format of the film counter.
1
Select [1-99], [1/2], [1/4], [1/8], or [1/16].
• If [1/2], [1/4], [1/8], or [1/16] is selected, the counter is reset to 1 when the number in the numerator becomes equal to
the number in the denominator.
 P-in-P Display
Configure the display settings for P-in-P mode.
[Off] The images input from an external device are not displayed on the monitor.
[On] The images input from an external device are displayed on the monitor.
1
Press [Off] or [On].
 External video input
Display images input from an external device on the touch panel. Only images that are input from an external device to the
VIDEO IN connector can be displayed.
1
Press [Switch].
• The images input from an external device are displayed on the touch panel. Touching the touch panel displays the
previous screen.
An animation is played at the set zoom ratio
and up/down order.
Indicates the set zoom ratio and up/down
order.
Set the up/down order
of the zoom.
Set the zoom ratio.
Operating Procedure
5
54