Pentax EPK-i7010 Instructions For Use Manual page 18

Connecting a monitor or recorder with a DVI or VGA input connector
Use the PENTAX Medical DVI cable (OS-A78) to connect the DVI connector to a DVI input connector of the recorder(HVO-
1000MD), or use the PENTAX VGA cable (OS-A74) to connect the DVI connector to a VGA input connector on the
monitor(Radiance19).
Connecting a monitor or recorder with a composite video input connector
Use the PENTAX Medical BNC video cable (OS-A17) to connect the VIDEO OUT/SYNC OUT connector to a video input
connector on the monitor or recorder.
Connecting a monitor or recorder with an RGB input connector (BNC)
Use the PENTAX Medical RGB cable (OS-A25) to connect the RGB connector to the RGB input connector on the monitor.
Connecting a monitor or recorder with a 4-pin female mini-DIN connector
Use the PENTAX Medical Y/C cable (OS-A24) to connect a Y/C connector to the 4-pin female mini-DIN connector on the
monitor or recorder.
NOTE
Depending on the setting of the monitor screen, endoscopic image or text information might spill out of the screen. Adjust
the display position by performing overscan/underscan adjustment or vertical/horizontal adjustment and make sure that
3
the image as well as text is correctly displayed on the screen.
13
Preparation