Setup Menu Operations; [I-Scan] Tab - Pentax EPK-i7010 Instructions For Use Manual

Setup Menu Operations

Pressing e on the touch panel displays the Setup menu.
Press a tab to display
the setting items for the
corresponding
category.
The Setup menu contains the following categories.
i-scan Configure settings for image processing related to i-scan mode.
I "[i-scan] Tab" (P.35)
Image Configure settings for image processing performed on endoscopic images, and settings related to twin mode.
I "[Image] Tab" (P.39)
Customize Configure settings for functions assigned to customize buttons, endoscope buttons, and foot switches, settings
related to monitor display, and other settings.
I "[Customize] Tab" (P.44)
System Configure settings related to saving endoscopic images, and settings related to the processor unit. Be sure to
check the setting options before using the processor for the first time.
I "[System] Tab" (P.58)
5
Peripheral Configure settings related to the peripheral device.
I "[Peripheral] Tab" (P.71)

[i-scan] Tab

Pressing the [i-scan] tab displays the following screen. The screen has two pages.
Display the setup menu for each
of the categories.
35
Operating Procedure
Return to the main screen.
Return to the previous screen.
Return to the main screen.
Change the page.
Press any of the buttons to
configure the setting.
Display the advanced settings
screen.