SE
Set the level for SE (surface enhancement).
1
Press [Off] or one of the six levels.
• A higher numerical value sets a higher level.
CE
Set the level for CE (contrast enhancement).
1
Press [Off] or one of the six levels.
• A higher numerical value sets a higher level.
NOTE
If [SE] or [CE] is used, noise may become visible in images on the monitor screen.
The [SE] and [CE] settings are stored in memory even after you turn off the processor.
TE
Set the mode for TE (tone enhancement).
1
Select [Off], [p], [v], [b], [e], [g], or [c].
Be sure to check that the endoscopic images on the monitor are not static and that the images are displayed with the
correct orientation each time after changes have been made to [SE], [CE], and [TE].
OE
Set the mode for OE (optical enhancement).
1
Select [Off], [Mode1], or [Mode2].
• It cannot be processed simultaneously with [SE] [CE] [TE].
• If an endoscope is not connected to the processor, the message "Connect endoscope." appears.
NOTE
[OE] setting remains even when an endoscope is taken out and inserted by [Scope eject] with a processor's main
body turned on.
When changing the mode of OE, an image may be disturbed until its completion.
Operating Procedure
5
36