Pentax EPK-i7010 Instructions For Use Manual page 19

 Connecting a Printer, USB Flash Memory or External Hard Disk Drive
Connect a printer or "Image Recording Media" (P.91) to the processor.
For details on a printer, refer to the IFU for the printer.
USB Flash Memory or External Hard Disk Drive
Using RGB output method
Use an RGB cable (OS-A25) to connect the RGB connector to the connector on the printer.
Using Y/C output method
Use a Y/C cable (OS-A24) to connect the Y/C connector to the connector on the printer(UP-55MD).
Connecting a printer with an video input connector
Connect the VIDEO OUT/SYNC OUT terminal of the processor with video input terminal of the printer (UP-25MD) using a BNC
cable (OS-A17).
Connecting a USB printer
Use a USB cable(2.0m) to connect a USB port on the front or rear of the processor to the port on the USB printer(UP-D25MD ).
 When using a printer, be sure to adjust the settings of the printer so that the colors in images appear the same on the
monitor and in printouts.
 Compatible USB printer with the processor is UP-D25MD (Sony Business Solutions Corporation).
USB Cable
RGB Cable OS-A25
Y/C Cable OS-A24
PENTAX Medical Control Cable OS-A58
Printer
14
Preparation
3