Table of Contents
Advertisement
i-scan1-3
Select the i-scan mode.
1
Select [Off], [i-scan1], [i-scan2], or [i-scan3].
• The selected button illuminates, and the settings registered in [i-scan profile] are loaded.
• If one of the i-scan modes is already selected, the currently enabled button will be lit.
• If an endoscope is not connected to the processor, the message "Connect endoscope." appears.
NOTE
Configure each setting of [i-scan1], [i-scan2], and [i-scan3] in [i-scan profile].
The [i-scan1-3] settings are retained even if the endoscope is removed and inserted using [Scope eject] while the
processor is on.
Operating Procedure
5
38
Hide quick links:
Advertisement
Table of Contents
