Pentax EPK-i7010 Instructions For Use Manual page 53

 Assign scope buttons
Set the functions for the endoscope buttons.
1
Press [>].
• The [Assign scope buttons] screen appears.
2
Select the endoscope buttons ([1], [2], [3], or [4]) for
which you want to assign a function.
• The selected endoscope button illuminates blue.
3
Press the button of the function you wish to
configure.
• You can press W X to display additional functions.
• The name of the assigned function is displayed below the
endoscope button.
• Pressing [Peripheral] displays the [Peripheral] screen. On this
screen, each external output can be switched on or off.
Press the button of the function to output so that the button
illuminates blue. Simultaneous output of multiple functions is
possible.
• Pressing the button again switches off the output.
The following functions can be assigned.
Function Name
No operation
Freeze
Function Description
A function is not assigned to the button.
Switch between video mode and freeze mode.
The function assigned to each
endoscope button is displayed.
Assignable Functions
Display additional functions.
Operating Procedure
5
Reference
Page
—
—
48