[Peripheral] Tab - Pentax EPK-i7010 Instructions For Use Manual

[Peripheral] Tab

Pressing the [Peripheral] tab displays the following screen. The screen has one page.
Display the setup menu for each
of the categories.
 USB printer control
Capture and output endoscopic images to the USB printer or print captured images.
1
Press [>].
• The [USB printer control] screen appears.
2
Select [1-up], [2-up], or [4-up] to set [Multi picture
mode].
• The set split method is displayed in a preview.
3
Press [Capture].
5
• The endoscopic images are captured and output to the USB
printer. "○" is displayed on the monitor during the capture.
• The boxes in the preview display illuminate blue. When [2-up] or
[4-up] is set for [Multi picture mode], the boxes for the number of
captured images illuminate blue in numerical order, and the box
number in which the next image will be captured flashes.
4
Press [Print].
• The captured endoscopic images are printed.
• An animation indicates the print progress.
 Do not connect more than one USB printer or connect a printer via a USB hub.
 A white "○" is displayed on the monitor until printing has finished. Do not turn the processor off while "○" is displayed.
NOTE
If a USB printer is not connected, [USB printer control] is not available.
 RS-232C
Set the device connected to the RS-232C connector.
1
Press [Off] or [Endonet].
 Network
Set the network connected to via the RJ45 connector.
1
Press [Off] or [Endoimage2].
 Remote
Set the active period for output from the REMOTE connector.
1
Select [200ms], [300ms], or [400ms].
71
Operating Procedure
Return to the previous screen.
Return to the main screen.
Press any of the buttons to
configure the setting.
Split method Press any of the
preview display buttons to configure
the setting.
Print a captured image.
Capture an endoscopic image.