Pentax EPK-i7010 Instructions For Use Manual page 16

 Connecting a Power Supply
Connect the power cord to a suitable power outlet with a protective earth terminal that meets the power rating indicated on the
rating plate or a medical grade isolation transformer. When peripheral devices are used, connect the devices to the medical
grade isolation transformer of the appropriate power rating in order to reduce the risk of electric shock.
WARNING
 To reduce the risk of electric shock, connect the power cord of the equipment into a power outlet with protective earth.
 When peripheral devices such as a monitor are used, connect the devices to the medical grade isolation transformer
of the appropriate power rating. Do not connect the devices which are not used to the isolation transformer.
 Check that the total power consumption of all connected devices does not exceed the isolation transformer's power
rating.
 Make sure that output is in compliance with IEC 60601-1.
 Make sure that the power cord is connected to a suitable power outlet with a protective earth terminal.
3
Peripheral Device
Isolation Transformer
1
Connect the AC power cord to the power input socket of the processor.
2
Connect the power cord to a suitable power outlet with a protective earth terminal that meets the
power rating indicated on the rating plate or a medical grade isolation transformer.
• Make sure the processor is turned off beforehand. If the switch has "looseness", the processor is turned on. If the
switch has "looseness", push the switch again and confirm there is no "looseness".
• When connecting peripheral devices to an isolation transformer, make sure the peripheral devices are turned off
beforehand. For details, refer to the IFU for the peripheral devices.
11
Preparation
AC Power Cord
Processor
Power Outlet