Lubricating The Steering Head Bearing; Removing The Start Number Plate; Installing The Start Number Plate - GAS GAS MC 85 2023 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.13
11.14
11.15
50

Lubricating the steering head bearing

H02387-01

Removing the start number plate

S04332-10

Installing the start number plate

S04333-10
S04334-10
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
Info
The steering head bearing is cleaned and lubricated in the
course of removal and installation of the lower triple clamp.
–
1
Remove screw .
–
Unhook the start number plate from the brake line and remove it.
–
Attach the start number plate to the brake line.
–
Position the start number plate.
1
Holding lugs engage in the fender.
–
2
Mount and tighten screw
Guideline
Start number plate
screw
( p. 45)
( p. 46)
.
M6 4 Nm (3 lbf ft)