Setting Up A Track; Clearing The Current Track; Managing Tracks - Raymarine hsb2 PLUS Owner's Handbook Manual

5-40

Setting Up a Track

You use the track soft keys to switch the track on and to specify the interval at
which track points are saved. The interval default is a distance of 0.1nm. The
maximum track length is 500 points, when the track has reached this length,
the first points are overwritten. The track is saved until you switch it off.
➤ To set up a track:
1. Press the TRACK INTERVAL soft key.
TRACK
INTERVAL
Press the appropriate soft key to set either a time interval or a distance inter-
val; press the UP arrow to increase the interval, the DOWN arrow to decrease
the interval.
Press ENTER to return to the track soft keys.
2. Press the TRACK OFF ON soft key to toggle tracks on.
TRACK
OFF ON
Your vessels trail will be displayed on-screen, with a line joining the
points at the selected interval.

Clearing the Current Track

You can clear the current track from the screen. When you select CLEAR
TRACK, if the current track has not been saved, you have the option of saving it.
➤ To clear the current track:
1. Press the CLEAR TRACK soft key.
CLEAR
TRACK
2. If the track has not been saved the SAVE TRACK soft keys are displayed.
To clear the track without saving it in the Track List, press NO.
SAVE
To save the track in the list, press YES. The Name track soft keys are dis-
TRACK
played and you should continue as described in the following section, Sav-
ing and Naming a Track.
Press CLEAR to abort the Clear Track operation.
The current track is cleared from the screen and the default soft keys are
displayed.

Managing Tracks

Although it is easy to set up a track, and this track is retained even if you switch
off your display, you can store a number of different tracks so that you can
review them at a later date. This section explains how to:
• Save and name a track.
• Name, Erase and Show an existing track.
TIME
1S
hsb Plus Series Fishfinders
2
DISTANCE
0.1nm
D4258-1