Raymarine hsb2 PLUS Owner's Handbook Manual page 106

4-10
The distance-from-boat continues to update as your boat moves. However, the
vertical line does not scroll with the scrolling fishfinder image. If the display
range changes, the VRM adjusts its relative position so that it does not move
out of the visible display area.
When you switch on the VRM, it is displayed at its last position (unless off
screen, then it is displayed on-screen).
If the Fishfinder is in split frequency display mode or a zoom window is
displayed with the scrolling fishfinder image, then the VRM is shown in both
windows at the same position.
If bottom lock is displayed with the scrolling fishfinder image, then the
crosshair lines appear in bottom lock window, but not in the scrolling
fishfinder window.
➤ To switch the VRM on, or re-position an off-screen VRM:
1. Press VRM/EBL.
VRM/EBL
The VRM is displayed in its last-used position.
The cursor is positioned at the center of the crosshair and has control of the
VRM, as indicated by four-way arrow, the solid crosshair and the text VRM.
2. Use the trackpad to position the center of the crosshair over the required
object. The depth and distance-from-boat are updated as you move the cur-
sor.
3. Press ENTER to drop the VRM. The crosshair is displayed as a dashed line.
➤ To move a VRM:
1. Move the cursor over the VRM you wish to change then press ENTER.
The cursor is positioned at the center of the crosshair and has control of the
VRM, as indicated by four-way arrow, the solid crosshair and the text VRM.
VRM
2. Use the trackpad to move the cursor and VRM to the required position.
3. Press ENTER to drop the VRM, or CLEAR to abandon the operation and
return the VRM to its previous position.
➤ To switch the VRM off:
Either:
Press VRM/EBL. The VRM is switched off.
VRM/EBL
Or:
Move the cursor over the VRM, until the text VRM appears, then press
VRM
CLEAR.
hsb Plus Series Fishfinders
2