Raymarine hsb2 PLUS Owner's Handbook Manual page 147

Chapter 5: Standard Chart Operations
If the operation fails, the Save Failed message is displayed.
➤ To receive incoming waypoints on SeaTalk or NMEA:
1. To display the waypoint list, press MARKS followed by the WAYPOINT LIST
MARKS
soft key.
WAYPOINT
LIST
2. Press the WAYPOINT TRANSFER soft key.
3. Press the soft key RECEIVE WPTS FROM ST/NMEA.
The soft key changes to STOP RECEIVING WAYPOINTS.
WAYPOINT
TRANSFER
When waypoints are transmitted by other equipment they are added to the
waypoint list on the chartplotter. Routes transmitted on NMEA are
appended to the route list.
4. To disable waypoint transfer, press the soft key STOP RECEIVING WAY-
POINTS.
Alternatively, press ENTER, or CLEAR, twice to close the Waypoint List.
USER CARD MENU
USER CARD PRESENT
SAVE COMPLETE
SAVED 2 ROUTE(S) AND
7 WAYPOINT(S)
LOAD WPT/ SAVE WPT/
RTE DATA RTE DATA
FROM CARD TO CARD
USER CARD MENU
USER CARD NOT PRESENT
SAVE FAILED
NO OR INCORRECT CARD
ENSURE USER CARD IS CORRECTLY
INSERTED IN THE LOWER SLOT
LOAD WPT/ SAVE WPT/
RTE DATA RTE DATA
FROM CARD TO CARD
CHECK
CARD IN
USER SLOT
5595-1
CHECK
CARD IN
USER SLOT
5596-1
5-37