Using Alarms - Raymarine hsb2 PLUS Owner's Handbook Manual

Raymarine hsb2 plus radar: user guide
Hide thumbs Also See for hsb2 PLUS:
Table of Contents

Advertisement

4-8

4.4 Using Alarms

The ALARMS key is used to set up alarms; three alarms are available to alert
ALARMS
MULTI
you of fish, shallow water and deep water. Each alarm can be toggled ON and
OFF, and you set the depth at which shallow and deep water alarms are
triggered (between the ranges 2–3000 feet/0.5–500 fathoms/1–1000 meters).
You may want to use the shallow and deep water alarms when you are
anchored. Set the limits to just above and below your anchor depth; the
Fishfinder triggers an alarm if the anchor drags and the boats moves into
shallower or deeper water.
• Fish Alarm – If this alarm is ON the unit sounds a buzzer whenever it finds
a fish. Different buzzer tones are used to indicate fish detected by the
50 kHz and 200 kHz frequencies.
• Shallow water – You set depth at which the shallow water alarm triggers.
When the depth is less than that set, the buzzer sounds and a pop-up win-
dow describing the alarm is displayed. You cannot set the shallow alarm to
be deeper than the deep alarm.
• Deep water – You set depth at which the deep water alarm triggers.When
the depth is more than that set, the buzzer sounds and a pop-up window
describing the alarm is displayed. You cannot set the deep alarm to be shal-
lower than the shallow alarm.
deep water alarm, a minimum of 30 seconds must elapse before a another depth
alarm can sound again.
The top line status bar shows the condition of the alarms:
alarm is triggered and silenced, then the symbol is shown solid.
• S indicates the shallow alarm is enabled; a pop-up window indicates when
the alarm is triggered.
• D indicates the deep alarm is enabled; a pop-up window indicates when the
alarm is triggered.
External Alarms
All SeaTalk system alarms (except autopilot, shallow and deep) alarms are
received and displayed on the Fishfinder. You can silence these alarms by
pressing any key. No other action is taken by the Fishfinder except to silence
the alarm.
indicates an alarm is enabled. The speaker symbol is unfilled until an
indicates the fish alarm is enabled.
hsb
After you have acknowledged the sounding of a
Plus Series Fishfinders
2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

L1250L1250rcL755rcL760L760rcHsb2 plus series

Table of Contents