Raymarine hsb2 PLUS Owner's Handbook Manual page 133

Chapter 5: Standard Chart Operations
Figure 5-6:
4. If you do not wish to name or re-name the route, press the NO soft key to
clear the list. The route is saved and is listed as Route Not Named.
5. If you wish to name the route press the YES soft key:
Use the trackpad to move the cursor right or left to the character you wish
to edit. Then use the top or bottom of the trackpad to increase or decrease
the letter or number.
or
Use the arrow keys and alphanumeric keys on the ST80 Navigator keypad
to input or edit the characters, as described in Using the ST60 or ST80
Navigator Keypad on page 5-16.
6. Press ENTER to finish and clear the Name List, or press CLEAR to cancel
the operation. To return to the default soft key display, press ENTER again.
SAVE ROUTE
1 EMPTY
2 EMPTY
3 EMPTY
4 EMPTY
5 EMPTY
NAME ROUTE?
YES
Save Route Window
NO
D4155-1
5-23