Fishfinder Set Up Parameters; Target Depth Id; Color Bar - Raymarine hsb2 PLUS Owner's Handbook Manual

Chapter 7: Setting Up the System Defaults

7.4 Fishfinder Set Up Parameters

The SONAR SET UP option allows you to set up the fishfinder according to your
system configuration and your personal preferences.
The following table lists the Sonar Set Up parameters and their options, shows
the factory default setting, and provides a space for you to make a note of your
new default setting. Each parameter is described in the following subsections.
Table 7-3:
Parameter

TARGET DEPTH ID

COLOR BAR

DEPTH DIGIT SIZE
SONAR HSB MODE
DEPTH OFFSET
SPEED CALIBRATE
SONAR HISTORY
TEMP CALIBRATE
DEPTH RANGE
(L1250/RC Plus only)
SONAR SIMULATOR
Target Depth ID
You can select whether or not the depth is displayed for displayed fishfinder
echoes. When Target Depth ID is set to ON, the depth is displayed just above
each fish echo. When set to OFF, the depth of each echo is not displayed.
Color Bar
The color bar indicates the range of echoes displayed in each color (shade of
gray for monochrome displays). When set to ON the color bar is displayed on
the right hand side of the display.
Fishfinder Set Up Parameters
Options
OFF
ON
OFF
ON
LARGE
SMALL
REPEATER
MASTER
Value
0% to 200%
LARGE or SMALL
-9.0 °F to +9.0 °F
3000 ft (1000 m)
5000 ft (1700 m)
OFF
ON
Factory New Default
Default
OFF
ON
LARGE
MASTER
0.0
100%
LARGE
0°F
3000 ft (1000 m)
OFF
7-13