Raymarine hsb2 PLUS Owner's Handbook Manual page 74

3-10
• Fishfinder (Sonar)
• Data Log
The DISPLAY key also accesses the soft keys for the half-screen window
options.
➤ To change the mode, press the DISPLAY key to show the DISPLAY pop-up, then
press again to cycle through the modes available, shown in Figure 3-5.
DISPLAY
"DISPLAY" TO SELECT FULL SCREEN OPTION
SOFTKEYS TO SELECT WINDOW OPTION
CURSOR
099 o
BRG
2.410
RNG
WINDOWS
OFF ON
Figure 3-5:
The selected mode is shown by an icon with a black (monochrome LCD) or
red (color LCD) border and the mode is displayed on the screen. The
associated half-screen window soft keys are also displayed.
When the required mode is shown, press ENTER or CLEAR. The default soft
keys are displayed. The selected mode is shown full-screen; in Fishfinder and
Chart mode you can switch on half-screen windows for additional display, as
described in the following section.
If you press DISPLAY again, the pop-up and soft keys for the current mode are
shown.
Using the Dedicated Keys in Different Display Modes
When certain dedicated (hard) keys are pressed on a unit with the Raychart
feature, the sets of soft keys that appear can vary depending on whether the
currently selected mode is fishfinder or chart. The following describes the soft
keys that appear in the Fishfinder and Chart modes.
R
nm
CHART SONAR LOG
ft
SELECT
WINDOWS
Using the DISPLAY Key
hsb
40
SPLIT
HOR VER
D5012-1
Plus Series Fishfinders
2