Controlling The Display; Selecting The Mode Of Operation - Raymarine hsb2 PLUS Owner's Handbook Manual

Chapter 3: Getting Started & Adjusting the Display
Selecting the Color Set
➤ To change the color palette:
MULTI
1. Press the MULTI key to display the soft key controls, then press COLOR SET-
TINGS.
COLOR
SETTINGS
2. Press the COLOR SET soft key; this toggles between color set 1, bolder col-
ors and color set 2, softer colors.
3. Press ENTER or CLEAR twice to return to the default screen.

3.3 Controlling the Display

You control the display using the cursor and control keys. You start all
operations from the default screen, that is the default soft keys are displayed:
Fishfinder
Chart
When you have completed an action using the soft keys, press ENTER or
CLEAR to return to the default screen; you may need to press ENTER or
CLEAR several times to back-track through the soft key hierarchy.
Note: If you have set up your system so that the default soft keys are not dis-
played all the time, press any soft key to display the labels.
The remainder of this section describes how to select the mode of operation
and switch half-screen windows on/off. The following sections describe how
to set up the display for the Fishfinder and for the Chart (for fishfinder displays
with chartplotter functionality).
The controls are summarized in the laminated Quick Reference cards
that accompany this handbook.

Selecting the Mode of Operation

You use the DISPLAY key to select the full-screen mode. If the data is available
on your system, the following modes (described in Operating Modes on
page 1-6) can be selected:
• Chart
FREQUENCY ZOOM
ROUTE GOTO
BTM.LOCK A-SCOPE
D5010-1
SCREEN FIND SHIP
D4160-1
3-9