Raymarine hsb2 PLUS Owner's Handbook Manual page 76

3-12
Selecting a Half-Screen Window for Display
Note: Windows can only be used with Fishfinder or Chart screens, they are
not available on the data log screen.
➤ To select a window for display:
1. From the full-screen Fishfinder or Chart mode, press the DISPLAY key.
The following soft keys are displayed with an image of each available win-
dow:
Fishfinder
DISPLAY
Chart
DISPLAY
2. In fishfinder mode check that SPLIT is set to HOR. To select a different win-
dow, press either SELECT WINDOWS soft key until the required window is
highlighted. If necessary, this will toggle windows on. Press ENTER.
3. To toggle windows off, press the WINDOWS OFF ON soft key.
If any data boxes were displayed at the bottom of the full-screen image, they
are switched off until you return to full-screen mode. However, you can use
the SCREEN soft key in chart mode to switch the data boxes on - they are
displayed in the upper window.
Figure 3-6 shows the half-screen horizontal windows (in fishfinder mode).
Switching Control Between Fishfinder & Chart Screens
In a combined or an integrated system, to switch control between fishfinder,
radar and chart, you can change the full-screen mode using the DISPLAY key.
Alternatively, when you have both fishfinder and chart displayed in half-
screen windows the soft key CHRT SNR lets you toggle operating control
between the fishfinder and the chart window.
If a window is active, i.e., control of the cursor via the trackpad is available in
that window, and you switch windows off, control automatically returns to the
full-screen (upper window) mode.
WINDOWS SELECT
OFF ON WINDOWS
WINDOWS SELECT
OFF ON WINDOW
hsb Plus Series Fishfinders
2
SPLIT
HOR VER
D5011-1
D4156-2