Raymarine hsb2 PLUS Quick Reference Card

SEA
Soft Key Labels:
Change when you press a key.
Default soft key labels are shown.
HDG MODE TARGETS SCREEN MARPA
POWER
Soft keys
Press to select option, or highlight option or slider.
Labels change when you press soft/dedicated key.
Elipses (...) after the text indicate that pressing soft key
leads to a further display of soft key options.
ENTER
Confirms selection and (if appropriate) clears current
soft key labels. It either performs the selected task,
accepts changes, or leads to display of more options.
When cursor text is displayed, cursor takes control of
the object.
When arrow-head cursor symbol is displayed, drops
the object under cursor control.
CLEAR
Cancels operation in progress and returns to previous display.
Deletes an object/function under cursor control.
Trackball
Controls cursor position on screen, the sliders and setup options.
POWER
Press and hold until unit beeps to turn on display.
Press to toggle between Standby and Transmit.
Press for 3 seconds to turn off display.
Quick Reference Card: hsb
86060_1
GAIN
GAIN and SEA
DISPLAY
Controls for background noise (speckle) and sea clutter.
- Press for soft keys display.
SEA
- In MANual mode, turn knob to adjust setting.
MOB
MARKS
MULTI
VRM/EBL
Press soft key to toggle between Auto/Man.
Turn knob to adjust slider, and press ENTER to finish.
ALARMS RANGE
MULTI
Controls display contrast and brilliance, key lighting, rain clutter
around the vessel (RAIN), distant rain clutter (FTC), guard zone
alarm sensitivity and tuning the receiver.
- Press to display slider, options and soft keys.
- use trackball to highlight option in list.
ENTER CLEAR MENU
CONT
BRILL
LIGHTS
RAIN
FTC
ALARM
TUNE
ALARMS
Used to control guard zones.
- Press soft key to place guard zone if one not already placed.
- Press to display soft keys if guard zone already placed.
Use soft key to toggle zone ON or OFF.
Adjust size/shape using trackball, press ENTER to finish.
RANGE
Controls range scale.
Range scale and range rings are shown in the Status Bar.
- Press top of key to increase the range scale.
- Press bottom of key to decrease the range scale.
- Press and hold to change the scale faster.
2
PLUS Series CRT Radar Displays
GAIN AUTO SEA TUNE
HARBOUR OFFSHORE MAN AUTO MAN
AUTO MAN
Press soft key (if appropriate) to toggle highlighted
option between ON/OFF or between AUTO/MAN.
Turn knob to adjust slider setting of highlighted option.
Press ENTER to finish.
Adjust size/shape using trackball, press ENTER to finish.
GUARD 1 GUARD 2
OFF ON OFF ON
DISPLAY
Controls display mode and windows.
- Press for display mode and soft keys display.
- Press again to toggle through display modes, then ENTER.
- Press and hold for 2 seconds for full page radar display.
WINDOWS SELECT
OFF ON WINDOW ZOOM...
Press WINDOWS soft key to toggle window on/off, or return to
full screen.
Zoom: Press ZOOM key to display Zoom Window options.
Move Zoom box using trackball, press ENTER to finish.
MARKS / MOB
Controls placing marks, and Man Overboard function.
- Press for soft keys display, then press soft key to place mark.
- Press and hold for 2 seconds to activate or cancel MOB.
- Press ENTER to finish.
PLACE MRK PLACE MRK
AT CURSOR AT VESSEL
VRM/EBL
Used to measure range and bearing to/between targets.
- Press to place VRM/EBL if one not already placed.
Adjust position using trackball, and press ENTER to finish.
- Press to display soft keys if VRM/EBL already placed.
VRM/EBL
VRM/EBL1 VRM/EBL2 DATABOX
OFF ON OFF ON FLOAT¬ OFF ON
Use soft key to toggle VRM/EBL on or off.
Press FLOAT to access float options for existing VRM/EBL.
Press VRM/EBL DATABOX to toggle data box display off/on.
MENU
Provides access to setup options.
- Press to display soft keys.
SYSTEM RADAR MARPA
SET UP¬ SET UP¬ SET UP¬
Press soft key to display required setup menu, then use trackball to
select option and soft key to change setting.
Press ENTER to close menu, and CLEAR to finish.
D4111-3