B-2
Raystar 112, 105, Apelco 182 and 182XT
In order to connect your GPS to your Fishfinder, you must first cut off the 6-
pin connector and strip back the insulation on all the wires. Connect to the
Auxiliary Junction Box as shown in the first illustration below.
To connect your Differential Beacon Receiver, you must cut off the 5-pin
connector, strip back the insulation on all the wires, and connect to the
Auxiliary Junction Box as shown in the second illustration below.
CAUTION:
Ensure the correct polarity of the 12 V supply before applying display or
SeaTalk power. It is recommended that a multimeter is used to check the
connections.
To Display Unit
SeaTalk Socket
Black
12V
Power
Supply
(fused)
Red
To Display Unit
SeaTalk Socket
Black
12V
Power
Supply
Red
(fused)
hsb
Plus Series Fishfinders
2
Black
Red
From
Yellow
GPS
Green
sensor
White
Brown
D4294-3
Black
Red
From
Yellow
GPS
Green
sensor
White
Brown
Black
Red
From
the
Yellow
DBR
White
Green
D4295-3