Introduction To Hsb Systems; Display Unit Features - Raymarine hsb2 PLUS Owner's Handbook Manual

Raymarine hsb2 plus radar: user guide
Hide thumbs Also See for hsb2 PLUS:
Table of Contents

Advertisement

Chapter 1: Overview
Introduction to hsb
The
hsb
compatible units. For example, fishfinder data is transferred from the
fishfinder (the master display) via the
and controlled on any other
display). However, if you change, say, depth range on one display, it affects all
displays showing fishfinder or fishfinder/chart overlay.
In particular, you can connect your
Series Pathfinder Plus Radar and then to a remote
to provide fishfinder, chart, and radar functionality on all three displays.
Full functionality of the fishfinder is achieved when it is part of an integrated
system, with other equipment (in addition to other
via SeaTalk or NMEA 0183. Data from this equipment including position and
heading is displayed on the display and is used in calculations.
It is possible to connect up to ten
provide an integrated system. Earlier HSB (non-Plus) Display units can be
upgraded to provide
Displays on page 2-20 for details.
Note: Please contact Raymarine Customer Service or your authorized Ray-
marine dealer about upgrading your existing HSB (non-Plus) display units to
provide full
The
hsb
cartridge slots. Each display can access two local and up to six remote chart
cartridges. Charts can be controlled independently on each display, even when
a remote chart cartridge is being used. Details on connecting the equipment
are given in Chapter 2.

Display Unit Features

Fishfinder
• Displays depth, speed, and temperature, if the transducer is so equipped
• Dual or split frequency fishfinder display – 50 kHz, 200 kHz
• Display options – fishfinder window, zoom, bottom lock and A-Scope
• Uses position data from GPS, DGPS, WAAS or Loran-C technology
• Displays and transfers
• Provides full control of data from other
• Half-screen windows to display additional data: depth/temperature graph,
Course Deviation Indicator (CDI), Bearing and Distance Indicator (BDI),
navigation data
Systems
2
(High Speed Bus) connection enables transfer of data among
2
hsb
compatibility. See Connecting hsb2 Plus Series
hsb
2
Plus functionality.
2
hsb
system can include several chartplotter displays, each with two chart
2
, SeaTalk and NMEA data
hsb
2
connection and can be displayed
hsb
2
Plus Series LCD or CRT display (the repeater
2
Series Plus Fishfinder to a remote
hsb
2
Series Plus Chartplotter
hsb
2
hsb
2
Plus Series LCD or CRT displays to
hsb
2
instruments
hsb
2
1-5
hsb
2
Plus units) connected

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

L1250L1250rcL755rcL760L760rcHsb2 plus series

Table of Contents