Table of Contents
Advertisement
Chapter 3: Operating Instructions
The Split-Screen Sidelooker Page
The unit can also display Sidelooker information in a split-screen format.
When you choose the Window "D" display, the Sidelooker information
shares the display with part of the Downlooker display. See Fig. 3-23.
Fig. 3-23 Window "D" Page with Sidelooker Information
Turning on the Sidelooker Feature
The Sidelooker feature must be turned on using the System Setup
display. Press the Menu button, then the System Setup Soft Key, to
reach the System Setup display. See Fig. 4-3. Press the down-control
on the Trackpad to reach the line labeled "Sidelook." Press the left-
control to turn the feature on.
This unit uses separate settings for the range and gain/sensitivity for the
Sidelooker feature. You will have access to the Soft Keys for these
functions once the Sidelooker feature has been turned on.
Setting the Sidelooker Range
The unit uses a separate Range setting for the Sidelooker feature. (This
is different from the setting used for the Downlook page.) You must set
the range for the Sidelooker feature manually. (If the bottom rises or falls
when Manual Range is selected, the Fishfinder will not adjust for this.)
61
Sidelooker
display
Part of
downlooker
page
Hide quick links:
Advertisement
Table of Contents
