Gps Setup - Raymarine hsb2 PLUS Owner's Handbook Manual

Chapter 6: Further Chart Operations

6.7 GPS Setup

GPS set up page provides you with information and the status of the tracked
navigation satellites for a SeaTalk GPS. It also enables you to SET UP a SeaTalk
Differential GPS, by manually retuning it to a different differential beacon.
Note: The satellite information is not available when you use an NMEA GPS.
➤ To select GPS Set Up:
1. Press MENU, then press the GPS SETUP... soft key.
MENU
The Navigation Status pop-up window shown in Figure 6-4. This window
provides, for each tracked satellite, the satellite number, its signal strength,
GPS
SETUP!
azimuth angle and elevation angle from your vessel.
RESTART
Figure 6-4:
➤ To tune a differential SeaTalk GPS to another beacon:
1. Press D-GPS SETUP, the Differential GPS Setup pop-up is displayed with
GPS
SETUP!
MODE and BEACON SELECT soft keys.
2. Press MODE AUTO MAN to toggle the GPS to manual tuning.
3. Press BEACON SELECT, use the soft keys to set the required beacon fre-
quency and bit rate.
The status of the selected beacon is displayed in the pop-up.
Press ENTER to select the beacon and return to the Navigation Status win-
dow, then ENTER to return to the MENU soft keys.
NAVIGATION STATUS
SAT
SIGNAL
03
31
21
23
22
19
17
27
16
15
HDOP
1
D-GPS
SETUP!
GPS
Navigation Status Window
AZ ELEV
STATUS
IN USE 085 085
IN USE 292 051
IN USE 127 048
IN USE 075 043
IN USE 174 028
IN USE 290 014
IN USE 056 012
SPARE 321 011
SPARE 024 005
SPARE 237 065
FIX STATUS
FIX
6-9
D4281-2