Clearing The Current Route; Retrieve A Route From The Database - Raymarine hsb2 PLUS Owner's Handbook Manual

5-24

Clearing the Current Route

You can clear the current route from the screen. When you select CLEAR ROUTE
if the current route has not been saved, you have the option of saving it and, if
you are following the current route, you have the option to stop.
➤ To clear the current route:
1. Press the ROUTE default soft key or place the cursor over a route leg until
ROUTE
the text RTE is displayed.
Press the CLEAR ROUTE soft key.
RTE
2. If you are following the current route the STOP FOLLOW soft keys are dis-
STOP
played.
FOLLOW
To cancel the CLEAR operation press NO.
To stop following and clear the route press YES.
3. If the route has not been saved the SAVE ROUTE soft keys are displayed.
SAVE
ROUTE
To clear the route, without saving it in the route database, press NO.
To save the route in the database, press YES. The Name route soft keys are
displayed and you should continue as described in the previous section,
Saving the Current Route on page 5-22.
The current route is cleared from the screen and the default soft keys are
displayed. You can now use the ROUTE soft keys to make a route, or to show
another route from the database.

Retrieve a Route From the Database

You can select a route as the current route from the database list. The list is
accessed from the second set of ROUTE soft keys.
➤ To select a route as the current route:
1. Press the ROUTE soft key, followed by MORE, then press ROUTE LIST. The
ROUTE
route list is displayed as illustrated in Figure 5-7. The selection bar indi-
SHOW
cates the selected route.
ROUTE
2. Use the trackpad to select the required route then press the SHOW ROUTE
soft key. The chart is re-drawn at a scale suitable to display the whole route.
hsb Plus Series Fishfinders
2