Raymarine hsb2 PLUS Owner's Handbook Manual page 67

Chapter 3: Getting Started & Adjusting the Display
• Range adjustment can be made on either master or repeater display, but any
changes made are used on both displays.
• Simulator mode is repeated from the master, but cannot be selected on the
repeater display.
AUTO G RZ
FREQUENCY
Figure 3-2:
➤ To set the fishfinder display as a master or repeater:
1. Press the MENU key, then press the SONAR SET UP soft key. The sonar set
up pop-up window is displayed.
2. Use the trackpad to move the selection bar over the option SONAR HSB
MODE. The HSB mode soft keys are displayed.
3. Press the appropriate soft key to set the display as a MASTER or REPEATER.
Press ENTER twice to return to the default display.
50kHz
45
52
ft
ZOOM BTM.LOCK
Typical Fishfinder Display at Switch On
0
8
25
38
50
75
100
A-SCOPE
D5008-2
3-3