Table of Contents
Advertisement
Page. (The order will be different if you start from the Zoom or Bottom
Lock Modes.) To move from one menu item to another, press the
arrows of the Page Control Pad. (If you continue to press
enough, you will eventually return to the same menu item which
appeared originally.) The unit remembers which menu item was last used
for each page, and will display that item the next time you go to the Setup
Menu. To return to the normal display, press
disappear on its own in seven seconds). This arrangement allows you to
reach any item on the Setup Menu easily, make a change, then return to
the normal display quickly.
Range Setting
See Fig. 4-2. The "range" sets the maximum depth the unit will be able to
see. Use the < and > arrows of the Page Control Pad to select Auto or
Manual range. The Range menu item for the downlooker is available
from all pages except the Digital Page and the Sidelooker Page. (The
Sidelooker Page does have a Range menu item, but only for the
Sidelooker .)
Auto range
The FishFinder can be set to select the range by itself,
automatically. The unit chooses the shallowest range which
will still include the bottom in the display. If the bottom rises
or falls, the FishFinder will adjust the range to keep the
bottom in the display.
Manual range You can also set the range yourself. (However, if the
bottom rises or falls, the FishFinder will not adjust for this.)
As soon as you select Manual, the cursor will jump down a
56
. (The menu will
CLEAR
Fig. 4-2
Range
Menu Item
Setup Instructions
and
or
often
Advertisement
Table of Contents
