Raymarine hsb2 PLUS Owner's Handbook Manual page 192

7-20
➤ To switch the position offset on/off:
1. Select the POSITION OFFSET option, then press the OFFSET OFF ON soft key
to toggle the option on/off. The last selected offset value is added to posi-
tion data and the vessel is displayed at the corrected position.
➤ To set a new offset value:
1. Select the POSITION OFFSET option, then press the SET UP OFFSET soft key.
If necessary, position offset is automatically toggled on.
2. Use the trackpad to move the cursor to the required vessel position; the cur-
sor position is displayed in a position offset data box.
3. Press the ACCEPT OFFSET soft key, the vessel is displayed at the new posi-
tion. Press ENTER to return to the default display.
➤ To set the offset value to zero:
1. Select the POSITION OFFSET option, then press the SET UP OFFSET soft key
2. Press the CANCEL OFFSET soft key. The position offset value is set to zero.
hsb Plus Series Fishfinders
2