Object Information; Palette (Color Lcds Only); Waypoint Options; Vectors - Raymarine hsb2 PLUS Owner's Handbook Manual

7-18
• Head Up: The chart is displayed with the vessel's current heading
upwards. As the heading changes the chart will rotate.

Object Information

You can set Object Information ON ALL, ON POINTS or OFF to determine when
an object identification pop-up is displayed. When set to ON ALL, the
information pop up is displayed when the cursor is placed over any chart area
for two seconds. ON POINTS enables the information pop up when the cursor is
placed over a displayed chart object and OFF disables the information pop up.

Palette (Color LCDs only)

The Palette option lets you specify which color palette, SHADE or SUNLIGHT,
the display uses.
The Sunlight palette is optimized for best display clarity in bright sunlight. In
dimmer conditions you may prefer the shade palette.

Waypoint Options

Waypoint Symbols controls whether or not the waypoints are shown on the
Chart display, with their appropriate symbols. The active waypoint, and
waypoints in the current route are always shown.
Waypoint Numbers controls whether or not the waypoint numbers are
shown for any waypoints in the current route.
Default Waypoint Symbol lets you select the symbol you want used for
waypoint display.

Vectors

Heading, Tide and Course Over Ground vectors can be displayed as a line
from your vessel. The length of the vector is determined by your choice of
SOG and the time period. An infinite vector extends to the edge of the chart
screen.
Heading Vector indicates your current heading.
COG Vector indicates your course over ground.
Tide Vector indicates the tide angle. Tide information is calculated from the
speed through water, compass and position data.
hsb Plus Series Fishfinders
2