Raymarine hsb2 PLUS Owner's Handbook Manual page 30

1-18
Note: During many operations you cannot move the cursor around the
screen; if you cannot move the cursor using the trackpad, check the default
soft keys are displayed (unless they have been switched OFF in system set up).
If not, press ENTER until they are displayed.
The cursor is normally displayed as a crosshair. However, in chart mode, if
you have not moved the cursor for more than five seconds, when you next
move it the cursor is outlined by a circle so it is easier to locate on the screen.
Context-Sensitive Cursor Control
The cursor is context-sensitive. When the cursor is positioned over special
features on the display a text label appears to identify the feature as follows:
Table 1-2:
Text Label
BOX
MOB
WPT
BL
VRM
ZOOM
➟
A B
COG
HDG
POS
RTE
TIDE
Chart Icons
Some items on the fishfinder/chartplotter screen, such as the cursor have
information associated with them. Most information is displayed in a data
box. The context-sensitive cursor allows you to move databoxes. In the case of
Fishfinder VRM data, depth is displayed on the right hand side of the
horizontal indicator, and distance is displayed at the top of the vertical
indicator.
Context-Sensitive Cursor Text Labels
Feature
Data box (any type)
Man Over Board marker
Waypoint
Bottom Lock
Variable Range Marker
Zoom
Ruler line
Course Over Ground vector
Heading vector
Vessel's position
Route leg
Tide vector
Various
hsb Plus Series Fishfinders
2
Fishfinder/Chart
Both
Both
Both
Fishfinder
Fishfinder
Fishfinder
Chart
Chart
Chart
Chart
Chart
Chart
Chart