Configuring From The Web Menu - Sony PXW-Z750 Operating Instructions Manual

73
5. Network Configuration

Configuring from the Web Menu

The web menu of the camcorder appears
when the camcorder is accessed from a
browser on a device connected using a
wireless LAN connection. Using the web menu,
you can configure settings related to wireless
functions, transfer files, and perform other
actions.
Displaying the Web Menu
1
Connect the camcorder to the Internet
using the procedures in "Connecting
Devices using Wireless LAN" (page 57)
and "Connecting to the Internet"
(page 61).
2
Launch a browser on the device and enter
"http://192.168.1.1:8080/index.html" in
the URL bar.
The user name and password entry
screen appears.
3
Enter a user name and password, then
select [OK].
For the user name and password for
access authentication, see Maintenance
>Access Authentication (page 112) in
the setup menu.
Setup Menu
Launch a browser on the device and enter
"http://<IP_address>:8080" in the URL
bar, where "<IP_address>" is the IP address
(Maintenance >Network >IP Address in the
setup menu) of the camcorder, to display the
Media Info >SD Card screen of the camcorder.
Tapping in the top left of the web menu
screen will display the configuration menus.
Tap the item you want to configure.
The menu has the following items: Settings,
Media Info, Job List, and Cam Remote Control.
Settings
Used to configure the camcorder. This screen
has the following items.
Item Description See
Wireless Streaming Streaming
Module format Format Settings
>Streaming settings (page 73)
Format
Wireless Proxy format Proxy Format
Module settings Settings
>Proxy Format (page 74)
Wireless Load Network System Settings
Module Client Mode (page 74)
>System Settings
Settings certificate
(execute
using Load
button of
Load
Certification)
Wireless LAN Wireless LAN Wireless LAN
>Station settings Station Settings
Settings (page 75)
Wireless LAN Wireless LAN Checking
>Status settings wireless LAN
status settings
(page 75)
Wired LAN Wired LAN Wired LAN
>Wired LAN settings Settings
Settings (page 75)
Wired LAN Wired LAN Checking wired
>Status settings LAN settings
status (page 76)
Upload Transfer Transfer (Upload)
Settings settings Settings
(page 76)
Media Info
Displays media information and is used to
select files to transfer from media.
ˎ SD Card: Media inserted into the PROXY SD ˎ
card slot of the camcorder.
Double-clicking a file will start playback of
the selected file.
[Note]
Playback may not be supported, depending on the
operating system of the terminal device used and the
browser version. If this occurs, use "Content Browser
Mobile."
ˎ Slot A: Media inserted into card slot A of the ˎ
camcorder
ˎ Slot B: Media inserted into card slot B of the ˎ
camcorder
Job List
Displays the Job List screen for managing file
transfers (page 77).
Cam Remote Control
Displays the Wi-Fi remote control screen
(page 71).
OSS Information
Displays copyright information.
Streaming Format Settings
You can configure the stream for monitoring
by devices, and set the format and
transmission destination of the stream for
streaming via the Internet or local network.
Video
ˎ AVC/H.264 Main Profile, 4:2:0 Long GOP ˎ
ˎ Size is selected in the following settings. ˎ
Audio
ˎ AAC-LC compression ˎ
ˎ Sampling frequency: 48 kHz ˎ
ˎ Bit rate: 128 kbps for stereo
ˎ
Monitoring Settings
You can set the format for monitoring by
devices.
Item Description Setting
Monitoring Sets the video size 480×270(1Mbps)/
Size and bit rate for 480×270(0.5Mbps)
monitoring.
Monitoring Displays the video 23.98fps/25fps/
29.97fps/50fps/
Frame Rate frame rate for
monitoring. 59.94fps
Monitoring Displays the video 1Mbps(VBR)/
Bit Rate bit rate for 0.5Mbps(VBR)
monitoring.
[Notes]
ˎ The bit rate is an average value, so this value may be ˎ
exceeded at times.
ˎ A video frame rate of 24 fps is not supported. ˎ
ˎ 640×360 (3Mbps (VBR)) is not supported for
ˎ
Monitoring Size.